Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ adjust bottom rod ”

Resolution: Required top and bottom rod adjustment. Top rod possibly is adjusted too short and not lifting the rod far enough to engage the latch retention which would cause bottom rod to drag floor ...:

Can you have Less Bottom Rod (LBR) on a 98/9947WDC?

Resolution: This option is available.If this is a fire-rated opening you must use the Auxiliary Fire Latch Kit to maintain your Fire Rating. If not fire-rated simply omit the bottom rod but be aware that...:

Can an electric strike be used with a surface vertical rod device on a fire-rated door?

Resolution: Not for use in fire rated openings.:

What would keep the vertical rod exit devices top latch from being held retracted in the open position?

Resolution: Following exit devices 2227/F, 33/3527A/F, 33/3547A/48A/F, 98/9927/F and 98/9947/48/F have similar rod adjustment procedures. All top latches control the bottom latch assemblies. When do...:

Is the 2227 panic exit device available LBR?

Resolution: The Von Duprin 2227 or 2227-F exit device is available less bottom rod. Specify 2227-LBR or 2227F-LBR for fire.:

How long are the rod lengths for the 25-V?

Resolution: The top and bottom rod itself is 35" long standard.:

Why would an EL1690 retract the rods but not hold them?.

Resolution: One of the following items may cause the EL1690 device to retract then release: Incorrect power supply - Verify you have the PS873-2/4TD or PS914-2RS/4RL power supply. Problems with wire gauge...:

Will the 25-C series rods and latches work on the old 18-C?

Resolution: The internal rods and latches for the 25-C carried over from the older 18-C device so they can be used interchangeably.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ adjust bottom rod ”

RELATED FAQS