Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Adjustable Extension Rod ”

Resolution: The 248L-4 strike will not violate ADA. If you change the 248L-4 to the 304L strike, then the latch would need to be lowered.:

Can an existing 1990 be changed to an EL1490 and use the existing rods?

Resolution: The EL1490 does not use the same rods as the 1990. However, the EL1690 would use the existing rods which would be the device used to exchange a 1990 device.:

How tall of a door can a standard 98/9947 fit?

Resolution: A standard device mounted at standard templating location will fit up to a 8'4" tall door. Extension rods for non fire rated devices over 10' are available and can be found in&nbs...:

Why is the 2390 top latch not staying retracted when dogged?

Resolution: Most likely need to length the top rod so latch can engage it's internal latch retention state. See 2390 Instructions for adjusting rod lengths.:

What would keep the vertical rod exit devices top latch from being held retracted in the open position?

Resolution: Following exit devices 2227/F, 33/3527A/F, 33/3547A/48A/F, 98/9927/F and 98/9947/48/F have similar rod adjustment procedures. All top latches control the bottom latch assemblies. When do...:

Why are my 1690 device bottom rod are dragging?

Resolution: Required top and bottom rod adjustment. Top rod possibly is adjusted too short and not lifting the rod far enough to engage the latch retention which would cause bottom rod to drag floor ...:

How do I adjust the rods on an old style 33/3547 device?

Resolution: See attached installation instruction for old style 33/3547 rod adjustment, 3347, 3547 Rod Adjustment.:

How to adjust the 9847/9947 or 9848/9948 rod adjustment?

Resolution: See the link to a video instruction, Concealed Vertical Rod Exit Device Adjustment.Manual steps:Open door and release top latch bolt by inserting a screw driver in the hole at the top of the d...:

Can I order a "one piece" top rod for an 8827 for a 9' door?

Resolution: 8827 vertical rod device is available for 7 or 8 feet tall door standard. 12", 24", 36" and 48" extension rod kits are available for taller doors (8 feet max on fire rated openings). We do no...:

Is an extension rod needed on 9927 for 7'1" door?

Resolution: The 9927 installed on a 7'1" door requires a 12" extension rod:

Can the XX-V, 19-V, 24-V or 25-V extension rod be used on the bottom rod?

Resolution: The extension rod could be used either on the top or bottom rods.:

Is there a part number for extension rods for 1690/1990 devices?

Resolution: From 9' to 10' use part # 4270100197 extension rod kit. :

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Adjustable Extension Rod ”

RELATED FAQS