Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ alx springlatch sleeve ”

RELATED FAQS

Resolution: See below for commonly requested dimensions on the MA lock. Dimensions not found in other literature have a square around them. CL refers to "Centerline". :

What is the center line of the lock case and the latchbolt on Schlage L9000 series lock?

Resolution: These dimensions and other general lock case dimensions can be found on template L1. :

What are the part numbers for the end case and latch case springs for the 88 rim?

Resolution: The part number for 88 rim end case spring is 090003-00 (PKG of 2) or 090080-00 (PKG of 10) and latch tail spring is 050393-00 (PKG of 10).:

Are the ALX-series and AL-series latches interchangeable?

Resolution: For example: The AL-series latch bolt bar only moves 3/8" which can cause problems if used with the ALX-series.:

Can the W-series latch be used with the ALX-series?

Resolution: The Falcon W series latch was not design or tested for use with the Schlage ALX lock. The W-series latch may fit, but the ALX latch is specifically designed for functionality and performance in the...:

Can a 6400 electric strike monitor a deadbolt rather than a latch?

Resolution: No. The latch monitor switch of the 6400 cannot be mounted inside the sleeve of the deadbolt keeper. Additionally, the deadbolt could damage tripper of the switch.:

What is the part number for the 98/9927 bottom latch and cover?

Resolution: The part number for 98/9927 bottom latch less cover is 050401-00 and the latch case cover is 050566-xx.:

How to adjust the 9847/9947 or 9848/9948 rod adjustment?

Resolution: See the link to a video instruction, Concealed Vertical Rod Exit Device Adjustment.Manual steps:Open door and release top latch bolt by inserting a screw driver in the hole at the top of the d...: