Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ blade stop template ”

Resolution: It would be unnecessary to use the CNS/Cush arm and the Glynn Johnson overhead devices in the same application, both mechanisms stop the door.:

What does BSS and CSS stand for?

Resolution: BSS means - Blade Stop Spacer. A -61 for example would be used after the series of the closer being used.CSS means - Cush Shoe Support. A -30 for example would be used after the ser...:

What is the part number for a blade stop shim for a 6111 or 6113 electric strike?

Resolution: 010055-xx is the part number for Blade Stop Shim kit for 6111 or 6113 electric strike and it must be ordered separately. xx is for the finish callout.:

BLADE STOP SPACER

Resolution: Shoe Spacer, Parallel Arm Closers, Aluminum Frame, Aluminum Store Front Frame:

BLADE STOP

Resolution: Aluminum Frame, Aluminum Store Front Frame, Aluminum Door and Frame:

Can I use a Glynn Johnson 410 with a 4040 regular (pull side) mount?

Resolution: ST-1630 is required when mounting a 4041 or 4040XP door closer regular (pull/hinge) side with a concealed GJ100 or GJ410 series over head stop.This ST also REQUIRES the use of a 4040-18TJ drop plat...:

What special template (ST) is used with a 4040(XP) Rw/PA mount closer and a GJ overhead stop?

Resolution: The use of a 62A Shoe (required) would be used to mount a 4040XP Parallel Arm with a "SURFACE" GJ 70, 79, 81, 90, or 450 series stop. You would order the 4040XP with a Reg w/62A arm op...:

What is the difference between the Von Duprin 1439 strike and the 299 strike when using the 33A/35A rim device?

Resolution: The Von Duprin 1439 strike is designed to be used on a blade stop frame and is 1/2" in height. The 299 strike is normally used on the stop of a frame and is 13/16" in height. :

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ blade stop template ”

RELATED FAQS