Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Can EL be held open ”

Resolution: Use a normally closed fire alarm as the input to the power supply option board (PS873-2 or PS914-2RS), this will hold the latch retracted. During a fire alarm, the contact will open, dropping...:

Are the Falcon EL solenoids rated for continuous duty?

Resolution: The Falcon EL devices can be operated in a continuous duty cycle.:

Are the EL wiring harnesses still required with the new potted module?

Resolution: EL wiring harness is no longer needed with new EL potted modules.:

Is the 900-ELK wiring adaptor required when using the PS914 power supplies?

Resolution: Products shipped on or after August 8, 2012 no longer require the EL wiring adaptor. The ELK Wiring Adaptor (900ELK) was used only when using the PS914 power supply with either the 900-2RS or...:

What is needed to keep the EL device retracted all day?

Resolution: To keep the Von Duprin electric latch retraction EL or QELA exit device dogged (retracted) all day, have your access control, Key pad, key switch, fire alarm contact or any other signals ...:

Can a magnet, or sentronic device, be released and close the door from a button at a desk?

Resolution: If a door is being held open by the LCN SEM 7800/1900 magnet or any ME/SE Series Sentronic LCN closer, you can remotely release that door to close by ordering the following parts and wiri...:

Will CX re-arm if door is held open?

Resolution: If a door position switch (DPS) is connected across the green and white wires of the old CX (green and red of new CX) the CX would go into alarm if the door is held open when it attempts to rearm.&...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Can EL be held open ”

RELATED FAQS