Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
can i flush mount schlage readers
”
RELATED FAQS
Question
Answer
Schlage MTMS15 and MTMSK15 Reader Compatiblity with CT5000
Resolution:
The Schlage MTMS15 and MTMSK15 readers are multi-technology readers designed to work across many different types of systems. Since there are many different magstripe clock/data formats, t...:
Are multiple narrow lights available?
Resolution:
Yes. Multiple glass lights are available on specific door series as a special option as noted below: L-Series and SL-Series: Core options - Standard honeycomb, polystyrene, polyurethane Lig...:
Are Schlage wall mounted readers FIPS 201 compliant?
Resolution:
The Schlage Smart and Multi-Technology Readers by Allegion have been approved by the U.S. Government under HSPD-12 for FIPS 201-1 compliance as PIV Transparent Readers. :
What is the read range of the new Schlage MT11 wall mounted reader?
Resolution:
All read ranges are affected by the environment the reader and card are subjected too. The following data was obtained in a relatively "noisy" RF area with the reader mounted on a metal ...:
What is the read range of the Schlage MT11 wall mounted reader?
Resolution:
All read ranges are affected by the environment the reader and card are subjected too. The following data was obtained in a relatively "noisy" RF area with the reader mounted on a metal ...:
What are the model numbers for the new Schlage and XceedID wall mounted credential readers?
Resolution:
The Legacy wall mounted readers are replaced as shown in the table below: The MTMS15 and MTMSK15 did not have any prior models that it replaced.:
Can a 4600 operator be mounted with pivots?
Resolution:
On a single door take the mounting dimensions from centerline of pivots (offset or center) On a pair of doors, depending on the door width and pivots being used, the operators can bu...:
How can a TK400 be reset to factory defaults
Resolution:
If a factory default reset (FDR) is absolutely needed, you MUST temporarily replace the credential reader with another reader that has a Schlage Button. This should be rarely if ever required. T...:
What is DeZigner Trim?
Resolution:
Basic glass trim details: :