Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
control battery holder
”
RELATED FAQS
Question
Answer
Schlage Control Locks - Do Battery Holders 47271341 Include Ribbon Cable
Resolution:
No, the replacement battery holders for Schlage BE467 and FE410 locks do not include the thru-door ribbon cable. :
Why do the batteries in my AD four battery pack pop out?
Resolution:
The original 4B battery holder used with the AD and CO Series products is updated to improve performance. The issues addressed include: - Improved spring ...:
How can I prevent putting the batteries in backwards in my AD four battery pack?
Resolution:
The original 4B battery holder used with the AD and CO Series products is updated to improve performance. The issues addressed include: - New ledges are added near eac...:
What are Hold Open Closers & Magnets?
Resolution:
Hold Open Closers & Magnets (Fire/Life safety products) provide a wide range of solutions. Single or multi-point hold open closers Utilize an electromechanical closer. Hold the door o...:
Why does the lock beeper on the AD-200 not sound when the Schlage button is pressed?
Resolution:
Check that the batteries are inserted into the battery holder in the correct polarity orientation.:
What is the low battery threshold for the AD and CO Locks?
Resolution:
CO200 & CO250 Disable coin cell Nuisance delay and blink, With CO.A.7 and SUS 4.10.2 or newer for CO200 and CO250, you can use the SUS/HHD, under Lock Properties, Edit, to de-select, DISABLE, t...:
What can I do if my biometric GT-400 isn't keeping the time?
Resolution:
First of all, measure the voltage of the coin battery, while still installed in its white plastic holder on the main board ( to find its location, please see lithium battery installation guide )&nb...: