Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ door closer on an exterior door ”

Resolution: ST-2456 is for a special cut and weld EDA arm when used with wide throw hinges and needing 180° door swing. When ordering, you will need to specify size of the hinges, door thickness if other than ...:

Can a pull side mounted 1460 open 180°

Resolution: A 1260 Pull Side can be mounted standard template for 180°, frame and trim permitting.:

Can a 4010 be mounted with swing clear hinges?

Resolution: Locate closer and arm from the centerline of the swing clear hinge pin.:

Which closer should I use for a "High Wind" condition?

Resolution: A 4110 with AVB (advance variable back check) would be recommended. Using a SCUSH (Spring Cush) arm will also help minimize shock to all door hardware.:

Where are hardware templates?

Resolution: All the templates can be found at us.allegion.com Please click here :

What is a 62A shoe used for?

Resolution: The 62A shoe is used when it is necessary to install the door closer (lower) down on the door so that it will operate under accessories such as overhead stops, coordinators, etc.:

Can you order a 1461 cylinder only?

Resolution: The part number is: 1461-3071 for the door closer cylinder body.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ door closer on an exterior door ”

RELATED FAQS