Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ el solenoid cover plate ”

Resolution: The conversion kit does not contain a new mechanism case cover plate. If a cover plate is desired, you would need the Fire or Less Dogging Cover Plate for EL/QEL conversion kit and Panic cove...:

What is the part number for the ND solenoid?

Resolution: The new motor driven ND electrified locks shipped after March 14, 2016 do not require a solenoid. The Schlage ND-Series electrified locks shipped prior to March 14, 2016 would have used a...:

What Von Duprin solenoid crosses over to the solenoid part number 971687?

Resolution: If you are trying to replace Von Duprin EL solenoid part number 971687, the sellable part number for the solenoid and plunger is 050535. Please note that the solenoid is rarely the cause of E...:

How do you test a Falcon 24 or 25 Series EL solenoid?

Resolution: The resistance readings for a Falcon 24 or 25 Series EL solenoid should read;Green to Yellow = Pull Coil, should measure between 1 and 2 ohms of resistance. Green to Orange = Hold Coil, s...:

What is needed to keep the EL device retracted all day?

Resolution: To keep the Von Duprin electric latch retraction EL or QELA exit device dogged (retracted) all day, have your access control, Key pad, key switch, fire alarm contact or any other signals ...:

How many thread should be showing on the solenoid plunger bushing on EL device to operate correctly?

Resolution: The threaded bushing on the solenoid plunger requires 8-9 threads showing to operate correctly.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ el solenoid cover plate ”

RELATED FAQS