Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ EL Troubleshooting guide ”

Resolution: You can use Windows' "Hyper Terminal" to configure console port troubleshooting, set up a serial connection, and/or set up RS232 output on a biometric GT-400: For the COM setting, go into the C...:

Hand Reader just stops communicating via Ethernet?

Resolution: When the Ethernet communications suddenly stop working on a biometric hand reader, there is the set of questions to ask the customer to start the troubleshooting process. They are detail orie...:

What is the power output of a 4600 operator?

Resolution: The 4600 Series operator has both a 12VDC and 24VDC output rated at 1A (combined load) to power strikes, maglocks, and other devices, but an EL device must have a separate Power Supply for motorize...:

How do I wire an EL device to normally hold open the latch and release it during a fire alarm?

Resolution: Use a normally closed fire alarm as the input to the power supply option board (PS873-2 or PS914-2RS), this will hold the latch retracted. During a fire alarm, the contact will open, dropping...:

How to wire 873-4TD to have 1 input trigger 2 EL devices?

Resolution: To trigger two EL devices with one access input, wire your input into SC & I1, the first two screw terminals, then jump from I1 to I2 terminals.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ EL Troubleshooting guide ”

RELATED FAQS