Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Exit device height from finished floor ”

RELATED FAQS

Resolution: Floor; Bottom of Frame:

What height should a lock or deadbolt be installed?

Resolution: According to ANSI specifications for cylindrical or mortise locks: The lock strike centerline should be 40 5/16" from the bottom of the frame with the lock in relation to the strike.&...:

STOP HEIGHT

Resolution: Distance the stop extends below the frame face:

What are the wire gauge and length requirements for QEL devices?

Resolution: Use #18 gauge wire up to 200 feet maximum distance from PS900 x 900-2Q power supply to the QEL exit device. The new QEL+ no longer requires the 900-2Q board but still needs a different option board...:

What is the difference between the 376T and the 360T trim when it is used with Von Duprin 33/3547A exit device?

Resolution: The 376T trim activates and connects to the 33/3547A top rod. The 360T activate and mounts to the 33/3547A center case.:

What would cause an EL device to pull and release?

Resolution: If your Von Duprin EL (solenoid) device pulls and releases quickly instead of holding the latch retracted, please check all of the items below.In most cases, one or more of these solutions will r...: