Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ extra long arm length ”

RELATED FAQS

Resolution: When dealing with glass lights in doors, there are three (3) critical dimensions which must be coordinated: Exposed Glass Size (EGS) - the horizontal and/or vertical dimensional size of the vision...:

What is the size of a 4854 or 4954 mullion?

Resolution: The 4854 and 4954 mullion dimensions are 2" width x 3" deep.:

What Schlage cam will operate Sargent locks?

Resolution: Click here for a list of available Schlage cams comparable to the Sargent 13-0660. :

What cam to use for a modular cylinder in Sargent mortise lock?

Resolution: The Sargent cams listed below work for all applications except 16 inside and 50 outside. The equivalent Sargent cam is the 13-0660. Use the B520-736 for modular cylinder lengths of 1 1/8",...:

How long is the RGO?

Resolution: The RGO (rod guard only) is 36" long x 1-5/8" wide.:

What are the dimensions for mounting a 1261 on the pull side of the door

Resolution: http://lcnclosers.com/pdfs:

What are the dimensions of the 993 spacer plate underneath the CO 993 Trim?

Resolution: 13 1/2" Long, 3 5/8" Wide, 1/4" Thick:

Chexit goes into alarm with fast flashing LED and not locking after rearm time.

Resolution: Chexit devices shipped prior to 8-24-2015 with solenoid driven: Chexit device has a RX switch with a connector that needs to be connected to the Chexit module otherwise the alarm will sound af...:

What length SRT screw is used for mounting the body of a 1461 closer?

Resolution: The SRT screw that is used for mounting the 1461 closer body is 1 3/8" long.Four screws are used to mount the closer body.:

How is the 100 series from Glynn Johnson different from the 100 ADJ series?

Resolution: The basic units are similar. The ADJ has a 12" long track that is mounted in the frame to allow the degree of opening to be selected in the field anywhere from 85 to 110 degrees, where the standar...:

How many door files should the Hand Held Device (HHD) be able to store at one time?

Resolution: For best Schlage Utility Software (SUS) and Hand Held Device (HHD) performance do not put more than 100 door files at a time ....:

What does "Sorry, Can't Add" mean on a hand reader?

Resolution: The message "Sorry, Can't Add" appears when trying to enroll a user on a hand reader. There are 2 reasons this message appears:1. The ID being enrolled already exists in the hand reader...:

What is the maximum reveal for a regular arm 4642 operator?

Resolution: Max. reveal for a 4642: 4640 Regular arm -- 4.5" 4640 Long arm -- 8" 4640 x ST-3088 ( custom made - extra long rod) -- 8" to 11" No special mounting instructions required, just standard templ...:

Which arm is the same as the 4640 regular arm?

Resolution: The 4640 Regular arm (4640-3077) is the same as: 4040 Long Arm 4820 Regular arm. The arms listed above are for reveals up to 4 1/2" and have a 8 3/8" long rod and shoe. 4640 Long arm ...:

EXTRA LONG ARM

Resolution: XLONG, Top Jamb Installation, Top JAMB, Deep Reveals:

How do I order a Senior Swing header?

Resolution: How to Order: The Senior Swing header is ordered by the width of the door(s). The measurement from inside jamb to inside jamb of the frame. If the Senior Swing header is ordered the wrong len...:

HOLD-OPEN LONG ARM

Resolution: HLONG, Deep Reveals:

LONG ARM

Resolution: LONG, Deep Reveal, Top Jamb Mount, Top Jamb Installation:

XLONG

Resolution: Extra Long Arm:

EXTRA DUTY ARM

Resolution: EDA: