Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ FALCON NON-IC CYLINDER ”

Resolution: Price Book 72A List Price $8.10:

Resolution: Cams for other applications may be specified with no additional charge, see pricebook.:

How does a Falcon Hotel cylinder operate?

Resolution: The following document contains information on Falcon (Non I/C) Hotel Cylinders, including part numbers, key requirements and operation. Falcon Hotel Cylinders.:

Can I put a Schlage Key-In-Lever cylinder into a Falcon D100 or D200 lock?

Resolution: For a Schlage "C" keyway: Specify "CP6" as the cylinder suffix when ordering D100 or D200 locks (All other Schlage keyways are not available).:

Is dogging available w/ EL option on 24 or 25 series devices?

Resolution: This option is not available as the solenoid is in the mechanism case where the dogging components would go. An HD-EL solenoid is not available, and Special Dogging(SD) is not an optio...:

Does the cam have to be inverted for cylinder dogging on the falcon 25?

Resolution: The cam is not inverted on the mortise cylinder for the CD option.:

Do the Falcon exit devices have the double cylinder option?

Resolution: A double cylinder(-2) option is not available on a Falcon device but is available from Von Duprin.:

What cylinder is used for the Falcon 510L and 510L-NL trim?

Resolution: The Falcon Monarch 510L and 510L-NL trim will accept either a 1 1/4" Mortise cylinder with a straight cam or a 1 3/8" Mortise cylinder with a straight cam using the blocking ring provided with the ...:

Is cylinder dogging available with the Falcon 1690/1790 exit devices?

Resolution: These devices are not available with cylinder dogging (CD), but the outside cylinder assembly on the pull side of the door can be set for a hold back (HB) function (instead of Night latch function)...:

What is the Falcon cam designation for use on 25 series trims?

Resolution: For standard (non-IC) cylinders, use the Falcon #4 straight cam For IC cylinders, use the Falcon #5 cam :

Is the C987 a small format or full size core?

Resolution: The "C" indicates small format IC core, which is the only core style Falcon products. The C987 will be provided less core unless -6, or -7 suffix is specified (6 or 7 pin core) Example:...:

What cylinder is required for the 360L from Von Duprin?

Resolution: A 1 1/4" mortise cylinder with straight cam (similar to the Schlage B502-191) or a 1 1/2" mortise cylinder with straight cam using supplied spacer collar. Cylinder length does not chan...:

What cylinder is used in the Falcon 24/25 exit alarm kit?

Resolution: The Exit Alarm takes a 1 1/8" Mortise cylinder with a straight cam. See first page of Exit Alarm inst below. Exit Alarm inst:

What keyway comes with the Falcon 19-KIL?

Resolution: The standard cylinder keyway that comes with the 914KIL trim is a Schlage 6 pin "C" section.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ FALCON NON-IC CYLINDER ”

RELATED FAQS