Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
hurricane device falcon
”
RELATED FAQS
Question
Answer
What is the Falcon SZ-Series Door?
Resolution:
Falcon SZ Series Door is the economy Steelcraft commercial grade door recommended light commercial applications when architectural specification are not needed. Options: The SZ-Series door is...:
Are flush bolts available on the inactive leaf of hurricane double doors with either FBC or NOA approvals?
Resolution:
Ives SB360 surface bolt at top and bottom are the only flush bolts approved for use on H-Series hurricane FBC or NOA applications? The only approved latching hardware for inactive leaf of pairs w...:
Can the Falcon Monarch 718C or 718NL trim be used with the 25-C exit device?
Resolution:
The Falcon Monarch 718C and the 718NL trims can be used on the 25-C exit device. The 718C trim is listed in the Price Book for the 25 series The instructions attache...:
How to order a 25-C device with the NL-OP trim function?
Resolution:
Device would be ordered as a 25C-C as of June 2012.The C-C suffix designates the 25C will come with the 718C-C cylinder control which uses a 1-¼" mortise with a narrow straight cam:
What BHMA Grade is the Falcon 25 Series exit device?
Resolution:
Falcon 25 series devices are ANSI/BHMA A156.3 Standard for Grade 1 device.References:Falcon 24/25 Series Heavy Duty Touch Bar Exit DeviceCertified Products Directory | BHMA:
Are glass lights available in the H-Series door?
Resolution:
Steelcraft offers all the standard lights as well as special size glass lights in the H-series door. Effective April 1, 2012, (Bulletin # B-100.12) the default for Dezigner Trim in H-Series D...:
Are the Falcon EL solenoids rated for continuous duty?
Resolution:
The Falcon EL devices can be operated in a continuous duty cycle.:
Is dogging available w/ EL option on 24 or 25 series devices?
Resolution:
This option is not available as the solenoid is in the mechanism case where the dogging components would go. An HD-EL solenoid is not available, and Special Dogging(SD) is not an optio...:
Is the XP98/99 device hurricane rated?
Resolution:
The Von Duprin XP98/99 exit device is hurricane rated (non-impact rated and impact-rated) for single doors or pairs of doors. Hurricane ratings vary by location and application. ...:
What door meets FBC / NOA Zone 4 requirements?
Resolution:
H-Series doors in single leaf applications with only mortise locks meet the FBC / NOA Zone 4 requirements?3070 max flushOutswing & Inswing applicationsZone 4 requires 120 to 170 psf.:
How is HB achieved on the 1690 device?
Resolution:
Install the pinion cam at the top of the retractor per Figure 7-3 in Step 7 of 1690 Instructions.:
Do Steelcraft PW-Series doors and FP-Series frames meet FEMA Tornado Resistant requirements?
Resolution:
Steelcraft Paladin PW-Series doors and FP-Series frames meet FEMA Tornado Resistant requirements and have been designed and tested to meet the requirements of FEMA 361 guidelines and ANSI ICC 500...:
Is the Falcon 1390 exit device dogging kit (4270106669) still available?
Resolution:
The Falcon 1390 exit device is discontinued and parts are no longer available from the factory. New England Door Closer may still have some older kits and can be contact...:
Can the Ives VR810 trim be used with the 25 device?
Resolution:
The VR 810NL-V or VR 814NL-V is used on both the 25-R & 25-V devices.:
Do 25 series exit devices have a hurricane rating available?
Resolution:
Order the 25 device with the "HH" prefix as described in the device options in the Price Book.:
Is the Von Duprin 2' door device provided with a UL label?
Resolution:
The Special Von Duprin 2' door device as of 02-07-14 is now shipped with UL Panic Hardware label or UL Fire Exit Hardware label. The 2’ devices are most commonly used in...:
Is there an EL conversion kit for the Falcon 2390 exit device?
Resolution:
There is no EL conversion kit for a 2390, the device will need to be replaced.:
What strike would be used for a 25-R for pair without mullion?
Resolution:
For non fire rated doors only the 1609 strike would be used on the inactive leaf that is flush/surface bolted or with a *surface or concealed vertical rod device on other door leaf.:
Are H-Series doors available with seamless edges?
Resolution:
For hurricane applications, seamless edges are available as an option:H-Series doors are available with optional seamed filled (HF) seam welded (HW) door edges.HE-Series doors are availab...:
Are Securitech 8400 series lock available on the Paladin series door?
Resolution:
The following Securitech products have been tested and approved for use on Steelcraft Paladin doors:5300 series devices- 3 point surface and concealed devices7300 series devices- 3 point surface an...:
What is the dogging hex key size on the Falcon Monarch devices?
Resolution:
The hex dogging key size for all Falcon-Monarch exit devices is 7/32".:
Warranty information on Allegion Commercial products.
Resolution:
See here for our Warranty Information. :
Do Steelcraft doors and frames meet Florida Building Code (FBC) requirements?
Resolution:
FBC Approvals: Yes, Steelcraft doors do meet the Florida Building Code (FBC) Protocols (TAS 201, TAS 202 & TAS 203) Missile impact & ASTM E-330 applications Dade County NOAs: Yes,...:
What exit device is weather rated?
Resolution:
The Von Duprin 98/99 rim and 98/9927 surface vertical rod exit devices are now available with the Outdoor Defense (OUT) option.Devices with the OUT option have a specialized coating applied to mech...:
What is the part number for a hex dogging shaft for Falcon Dor-o-Matic 1690 or 1790 exit device?
Resolution:
The part number for 1690/1790 hex dogging shaft is shaft.101:
What is the difference between the L-Series and H-Series doors?
Resolution:
The L-Series doors are designed for virtually all construction requirements in commercial building applications. They have also been tested and approved for uniform wind load per ASTM E330. ...:
What hinges can be used on tornado doors?
Resolution:
The following hinges are available on Paladin series doors and frames: Butt hinges - 4 1/2" or 5" ball bearing type either standard or heavy duty Continuous hinges - full ...:
What would the 904H stand for on a Falcon Monarch exit device?
Resolution:
The "904H" is a UL Panic label that is placed on the centercase of the Falcon/Monarch Panic device.:
Can H-Series doors be used in tornado applications?
Resolution:
No. The Steelcraft H-Series hurricane door does not meet the FEMA 361 guidelines. The Paladin (PW14-Series) door does meet the FEMA 361 guidelines.:
What door is used in a tornado application?
Resolution:
Tornado shelter applications require the use of Paladin PW14-Series doors and FP14-Series frames: Tornado shelter doors are a tested system comprising of the door, frame and hard...:
Can the 8200 Series operator power a electric strike?
Resolution:
The 8200 Series operator CANNOT power a strike, maglock, or EL device. A separate power supply is ALWAYS required. There is an onboard relay to control a strike, maglock, or EL device.:
Where is the template for the 718 trims made after 2/28/2011 for Falcon/Monarch concealed vertical rod devices?
Resolution:
Templates for current 718 series trim can also be found on Falcon website:
Which mullions are Hurricane Rated?
Resolution:
The HH9954 is the only Von Duprin hurricane impact-rated mullion. Hurricane ratings vary by location and application. Be sure to check with the local authority and/or the Regional Allegio...:
What anchors are used in FEMA Tornado Resistant openings?
Resolution:
The following anchors are approve for use in FEMA Tornado Resistant openingsMasonry walls:Jamb anchors - Wire masonry anchorsSill (base) anchors - Adjustable base anchorsExisting walls:Jamb an...:
What is the part number for the former F588 from Monarch?
Resolution:
The top latch for a Fire rated surface vertical rod device is part #650375-00 which replaced the old part #F588.:
Where can I find hurricane ratings for Schlage and Falcon?
Resolution:
There are several Schlage and/or Falcon locks that have been tested and approved for this application. For Commercial use the locks have been tested and approved as ...:
Where are the part manuals for Falcon exits?
Resolution:
Falcon (19. 24, 25, and XX) parts manuals for Exits are downloadable on the :