Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ ives wall stop warranty ”

RELATED FAQS

Resolution: Skip to main contentThe warranty policy outlined on this page is for Schlage-branded products only. To view a printable PDF of the warranty information below, please go here. To...:

Will there be 900-2Q boards for warranty purposes now that the QEL'S do not require the boards?

Resolution: The 900-2Q board is no longer available. For warranty purposes, QEL conversion kit and 900-2RS board are required. The 900-2RS replaces the 900-2Q board. :

Warranty information on Allegion Commercial products.

Resolution: See here for our Warranty Information. :

What is the difference between WS401 & WS401 wall stops?

Resolution: In the past, the WS401 and WS402 wall stops were separated due to having different mounting methods (drywall & wood). They have since been combined into one product containing both...:

What is the difference between WS406 & WS407 wall stops?

Resolution: In the past, the WS406 and WS407 wall stops were separated due to having different mounting methods (drywall & wood). They have since been combined into one product conta...:

What could cause a 9100 Series Benchmark operator not to open when the actuator is pushed?

Resolution: If the 9100 Series Benchmark operator does not open when the actuator is pushed: Verify the unit has 120 volts applied to it. Verify the the power light on the control box is on. If not, check ...: