Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ lcn gj reference ”

RELATED FAQS

Resolution: For LCN Cast Iron Closers See here.For LCN Alum Closers see here.For current ST pricing and templates please contact [email protected] or call 8776717011, press 2 for Produc...:

What LCN closer is comparable to the Norton 7500?

Resolution: The Falcon SC71 is an exact replacement for the Norton 7500. The LCN 1460 or 4040 Series closers could be used, the mounting hole pattern is different.:

Is there an LCN ST reference chart for PA mount cast iron closers with a 1/4" solid weather strip?

Resolution: Yes, a reference only chart. See here.These ST's will include a special 7/8" fifth screw spacer, special screw pack, and special template.:

Can I mount an LCN Cush closer with an GJ overhead stop?

Resolution: It would be unnecessary to use the CNS/Cush arm and the Glynn Johnson overhead devices in the same application, both mechanisms stop the door.:

What special template (ST) is used with a 5030 closer and a GJ100 with offset pivots/butt hinges?

Resolution: A special template (ST) is no longer required for the GJ100. Special template ST-9401 (from GJ) was the old nomenclature for the special jamb bracket.The CJ bracket is required when using a GJ-Ives...:

What is an error code E04 on an LCN 4600?

Resolution: An error - E 04 - is an indication of a constant activation input from either the "Hold Open" switch or a "Wall Activation" switch when the 4600 power is turned on. This condition also occurs when ...:

How do you identify the model number and date code of an LCN cast iron hydraulic closer?

Resolution: The date is a 4 digit #. The first 2 numbers indicate the week it was made, and the last 2 numbers indicate what year it was made. On most surface mounted closers, the model #, date code, ...: