Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ ma lock case ”

RELATED FAQS

Resolution: To remove the M lock trim follow the steps below in reverse. The M lock spanner wrench is 021415. Although this wrench is no longer available from&n...:

What non IC cam is offered by Schlage to work in a Falcon MA lock?

Resolution: Price Book 72A List Price $8.10:

What are the MA lock electrical requirements?

Resolution: For additional details and a wiring diagram see the MA service manual page on electrical requirements here.:

Are the M and MA locks compatible?

Resolution: No parts are compatible between the Falcon MA-Series and the obsolete Falcon M-Series.:

Falcon MA lock wire color.

Resolution: Solenoid: Black (2 wires) RX (monitors both sides) Normally Open: Green (pin 6 when connector included) Common: Orange (pin 5 when connector included) The current version o...:

Will the Von Duprin 6210 electric strike operate with the MA series locks?

Resolution: The Von Duprin 6210 electric strike was designed for retrofit applications and will not work with the Falcon MA series lock when strike and lock body are mounted at standard locations (centerline o...:

What is the minimum stile an MA lock can fit?

Resolution: Depending on the door construction the minimum stile may differ but a safe dimension would be 4-3/4". CUSTOMER must check door construction. The pocket depth requirements of the case is 4 1/2".:

Is the MA lock available with the RX feature?

Resolution: The MA RX features a single switch within the chassis that will monitor both the inside and outside knob/lever. The switch is only available as Normally Open (NO).:

What is the part number for the lever return spring for the MA lock?

Resolution: Lever assemblies part numbers are found in the Pricebook. Note they are handed.:

MA lock case dimensions.

Resolution: See below for commonly requested dimensions on the MA lock. Dimensions not found in other literature have a square around them. CL refers to "Centerline". :

Is there an ADA thumbturn offered in the MA locks?

Resolution: Falcon does not offer an "ADA style thumbturn.:

MA launch information

Resolution: The MA was launched 4/1/10 and replaced the Falcon M lock. :

Does Falcon have a breakaway lever trim feature on mortise locks?

Resolution: The MA lock does not have Vandlgard or a breakaway trim feature, however, the lever spindle on the MA lock will shear if too much force is applied in order to prevent internal lock damage and resis...:

What is the center line of the lock case and the latchbolt on Schlage L9000 series lock?

Resolution: These dimensions and other general lock case dimensions can be found on template L1. :

How to build an L-Series chassis.

Resolution: This Step-by-Step guide is specifically designed for the functions listed below, however, it can be referenced with a majority of L series functions since most of the parts are ...:

What is the part number for the L9080 lock case?

Resolution: The L9080 lockcase part number is L283-134.:

Falcon MA Series

Resolution: Grade 1 mortise lock:

CASE (OF A LOCK)

Resolution: Lock Case: