Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ MA lock not workin ”

Resolution: The MA lock does not have Vandlgard or a breakaway trim feature, however, the lever spindle on the MA lock will shear if too much force is applied in order to prevent internal lock damage and resis...:

Will mag locks operate with voltage ranges between 12vdc and 24vdc?

Resolution: The entire series of mag locks that Schlage provides advertises 12vdc or 24vdc because they will automatically determine what voltage is being used and switch the internal circuitry based on that v...:

What is the part number for the Schlage cylinder to work in a Falcon T lock?

Resolution: The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. Schlage offers Falcon Retrofit cylinders to fit many of Falcon's locks. Table 1 below con...:

What would cause an EL device to pull and release?

Resolution: If your Von Duprin EL (solenoid) device pulls and releases quickly instead of holding the latch retracted, please check all of the items below.In most cases, one or more of these solutions will r...:

What non IC cam is offered by Schlage to work in a Falcon MA lock?

Resolution: Price Book 72A List Price $8.10:

What is the part number for the lever return spring for the MA lock?

Resolution: Lever assemblies part numbers are found in the Pricebook. Note they are handed.:

Will the Von Duprin 6210 electric strike operate with the MA series locks?

Resolution: The Von Duprin 6210 electric strike was designed for retrofit applications and will not work with the Falcon MA series lock when strike and lock body are mounted at standard locations (centerline o...:

Are the M and MA locks compatible?

Resolution: No parts are compatible between the Falcon MA-Series and the obsolete Falcon M-Series.:

Does Schlage offer a cam that will work with a Yale mortise lock?

Resolution: Schlage offers a comparable cam to the Yale 2160 and it will operate any Yale lock that utilizes the Yale 2160 cam. Schlage Cams for Yale 2160 Part Number Description B520-7...:

Why will my EL 1490 fire my latches but not hold?

Resolution: One of the following items may cause the EL1490 device to retract then release: Incorrect power supply - Verify you have the PS873-2/4TD or PS914-2RS/4RL power supply. Problems with wire gauge...:

Why would an electric strike not stay locked when turned upside down?

Resolution: The Von Duprin 6000 series electric strike has a 12 or 24VDC solenoid with plunger, spring and impact washer as shown 6000 solenoid Make sure the solenoid spring and impact washer are not missin...:

How do I remove the lever on an M lock?

Resolution: To remove the M lock trim follow the steps below in reverse. The M lock spanner wrench is 021415. Although this wrench is no longer available from&n...:

Is there an ADA thumbturn offered in the MA locks?

Resolution: Falcon does not offer an "ADA style thumbturn.:

MA lock case dimensions.

Resolution: See below for commonly requested dimensions on the MA lock. Dimensions not found in other literature have a square around them. CL refers to "Centerline". :

MA launch information

Resolution: The MA was launched 4/1/10 and replaced the Falcon M lock. :

What are the MA lock electrical requirements?

Resolution: For additional details and a wiring diagram see the MA service manual page on electrical requirements here.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ MA lock not workin ”

RELATED FAQS