Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
mortise cam install
”
RELATED FAQS
Question
Answer
Can the modular cams be used on the older cylinders?
Resolution:
The cams for modular cylinders are unique and are not compatible with any non-modular mortise cylinders, Schlage or any competitors.:
What type of cylinder is the 20-001?
Resolution:
The 20-001 is a conventional mortise cylinder with a straight cam, compression ring and spring for use on rose trim. For use with the L9060 outside cylinder or other straight cam applications.:
Does the Von Duprin CD kit include the machined cover plate for the cylinder?
Resolution:
The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...:
What is the part number for a Schlage cam to operate a Corbin lock?
Resolution:
Schlage offers several Corbin Russwin competitor cams. The left most column in the image below describes what Corbin function the cam is used on and the additional columns show Modular,...:
What Schlage cam will operate Sargent locks?
Resolution:
Click here for a list of available Schlage cams comparable to the Sargent 13-0660. :
What is the part number for the dogged cam used in modular cylinders?
Resolution:
Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mounting holes that allow for the cams to be mounted inverte...:
How long does it take to install a L Series mortise lock?
Resolution:
Typical installation by an experienced Schlage L lock installer on a door correctly prepped for the Schlage L-Series function could take 10 to 20 minutes. Many outside variables can change the amo...:
How far does the 22 series center case cam have to rotate to fully retract the latch bolt?
Resolution:
:
What type of cylinder is the 30-001?
Resolution:
The 30-001 is a conventional mortise cylinder with a clover cam, compression ring and spring for use on rose trim. For use with the L9000 mortise locks except for the L9060 outside cylinder.:
How can the Von Duprin 98/9975-L with 996L classroom trim function be converted as a night latch function in field?
Resolution:
The following steps are required to convert the Von Duprin 98/9975L from classroom to night latch function: Order new 996L-NL-M trim and reset NL drive screw in mortise lockbody as se...:
What cam to use for a modular cylinder in Sargent mortise lock?
Resolution:
The Sargent cams listed below work for all applications except 16 inside and 50 outside. The equivalent Sargent cam is the 13-0660. Use the B520-736 for modular cylinder lengths of 1 1/8",...:
Does Schlage offer a cam that will work with a Yale mortise lock?
Resolution:
Schlage offers a comparable cam to the Yale 2160 and it will operate any Yale lock that utilizes the Yale 2160 cam. Schlage Cams for Yale 2160 Part Number Description B520-7...:
What is the standard Falcon cam?
Resolution:
Cams for other applications may be specified with no additional charge, see pricebook.:
What is the standard FSIC mortise housing with a straight cam?
Resolution:
20-059 is the standard straight cam FSIC housing only used with Von Duprin, Monarch, and other straight cam applications. 30-032 is the straight cam FSIC housing only for the outside of the Schl...:
What cylinder do I use on a Von Duprin Keyed Removable Mullion?
Resolution:
see installations instructions here :
What mortise cylinder cam is needed for KR4023?
Resolution:
The KR4023 mullion requires a 1-1/4" mortise cylinder with straight cam. This is stated in box 7 on the first page of the KR4023 mullion instructions.: