Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ mortise cylinder tailpiece ”

Resolution: Click here for a list of available Schlage cams comparable to the Sargent 13-0660. :

Resolution: Click here for the Schlage Modular Cylinder Marketing Sell Sheet for information on the modular cylinder.:

How do you specify cylinder dogging for mortise cylinders?

Resolution: XQ11-947 was used Classic conventional cylinders prior to the release of modular - NOW OBSOLETE:

Will a Medeco key-in-lever cylinder fit into an ND lock?

Resolution: Medeco does offer a key-in-lever cylinder to fit the Schlage ND. You will need to contact Medeco for the cylinder Specify a key-in-lever cylinder to fit the Schlage ND lo...:

What is the part number for the Schlage cylinder to work in a Falcon T lock?

Resolution: The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. Schlage offers Falcon Retrofit cylinders to fit many of Falcon's locks. Table 1 below con...:

What is the part number for the Schlage small format rim cylinder tailpiece?

Resolution: B502-899 is the tailpiece for both the SFIC and standard rim cylinders.:

What is the length of a Schlage rim cylinder?

Resolution: The Schlage rim cylinder lengths are given below and were measured from the face of the cylinder to the back of the tailpiece. Because of allowable tolerances for each part the average length is l...:

Why does my AD or CO series lock unlock when the lever is raised?

Resolution: Installers have reported that their AD-CO Series cylindrical or mortise locks will unlock whenever the outside lever is lifted. This will occur if the outside spindle (square post) is install...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ mortise cylinder tailpiece ”

RELATED FAQS