Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ multi tech readers ”

Resolution: All read ranges are affected by the environment the reader and card are subjected too. The following data was obtained in a relatively "noisy" RF area with the reader mounted on a metal ...:

What is the read range of the new Schlage MT11 wall mounted reader?

MiFare

Resolution: Type of smart card format whose serial number and secured sector are readable by AD Series prox and multi-tech readers.:

What is the SUS feature "Device Template"

Resolution: See the attached Technical Note for instructions on saving a "Device Template" FROM a device or loading TO a device, Device Template Tech NoteOn the SUS/HHD go to the LOCK Properties tab, and sele...:

What current should an AD-Series or CO-Series lockset draw while in its low power "Sleep" mode?

Resolution: Use a multi-meter in series with the batteries to measure battery current. Be sure your multi-meter can accurately measure very low current, in the micro-amp range. See the attached Technical Not...:

What are the model numbers for the new Schlage and XceedID wall mounted credential readers?

Resolution: The Legacy wall mounted readers are replaced as shown in the table below: The MTMS15 and MTMSK15 did not have any prior models that it replaced.:

Multi-Technology Reader

Resolution: A reader which communicates with both proximity cards or smart cards.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ multi tech readers ”

RELATED FAQS