Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ nd lever is sagging ”

Resolution: ND-series locks manufactured prior to January 30, 2017:03-030 - Closed03-031 - Privacy, Cylinder- Schlage KIL (P,L) & Push or Push & Turn Button03-032 - Schlage FSIC 03- 000 - Schlage ...:

Are the ND, NDe, AD and CO levers the same?

Resolution: Between January 30, 2017 June of 2019, the AD and CO cylindrical lock levers were incompatible because of the ND / NDe lever and spring cage design change in January of 2017.Prior to January ...:

Why is the Von Duprin 55 or 88 series crossbar sagging?

Resolution: There are a number of reasons the Von Duprin 55 or 88 series cross bar may not operate properly:The hinge case spring lifts both lever arms and the crossbar. To check spring, push down on...:

Why does my lever sag on an L9000?

Resolution: Levers may sag due to an incorrectly installed springcage or an incorrect springcage.Mortise locks with a fixed (rigid) lever such as an L9080 will use a spacer on the rigid lever (outside) and a s...:

What is the part number for the lever return spring for the MA lock?

Resolution: Lever assemblies part numbers are found in the Pricebook. Note they are handed.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ nd lever is sagging ”

RELATED FAQS