Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ nl-op installation instructions ”

RELATED FAQS

Resolution: You would have to order the device as 88NL less trim, the device will be shipped as an 88EO. The EO device has an NL cam to accept a rim cylinder tailpiece. :

How to order a 25-C device with the NL-OP trim function?

Resolution: Device would be ordered as a 25C-C as of June 2012.The C-C suffix designates the 25C will come with the 718C-C cylinder control which uses a 1-¼" mortise with a narrow straight cam:

When using the Ives VR910 trim, how is the Von Duprin 98/99 device ordered? Should it be ordered as "NL OP"?

Resolution: No, when ordering the Von Duprin exit device for use with the Ives VR trim, order the device as "EO" (exit only). The Ives VR trim is provided with a cylinder retaining cup. :

Does the Von Duprin E996L trim require the NL drive screw be installed into the device to function properly?

Resolution: Von Duprin 98/99 NL drive screw is located in back of the 98/99 center case assembly. NL drive screw should be left in with trim lock slide plate in up position in the 98/99 exit device with E99...:

Does Von Duprin offer an NL or NL-OP function with the 8827 exit device?

Resolution: This option is not available as there is no NL cam to directly drive the rods and using a key to lift the heavy stainless, brass or bronze rods would damage the key. :

Where is the template for the 25C NL-OP?

Resolution: The NL-OP function for 25-C uses the 718C trim, so template T-2211 for metal doors and W-2211 for wood doors for 718 trims prior to 2/28/2011. T-2211 for trims prior to 2/28/2011 W-2211 for...:

How do you convert the Von Duprin 370 series controls to NL or night latch function?

Resolution: You must have the Von Duprin NL Cylinder plate part number 967484-89 to convert the 370 series controls from classroom function to night latch function. If new installation, use the NL cylinde...:

How to convert 98TP to 98L-NL?

Resolution: To convert a 98TP to a 98L-NL you must purchase the 996L-NL trim and an NL drive screw (090074) to install in the master cam.: