Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
No sound when button is depressed
”
RELATED FAQS
Question
Answer
Why does the lock beeper on the AD-200 not sound when the Schlage button is pressed?
Resolution:
Check that the batteries are inserted into the battery holder in the correct polarity orientation.:
Does an ND50 or ND53 unlock when closing the door?
Resolution:
Both the ND50 and ND53 will not unlock when the door is shut. The only way to pop the button is by turning the key on the outside or the lever on the inside. Occasionally custome...:
How to Reset a BE367 Deadbolt to Factory Settings
Resolution:
For resetting a PED500 / BE367 deadbolt back to factory status, refer to attached guide: Deadbolt Reset InstructionsProgrammable Electronic Deadbolt: RESET back to factory settings It ...:
The Hand Held Device (HHD) or Schlage Utility Software (SUS) will not connect to the CO200?
Resolution:
Make sure the HHD/SUS is set to USB communication by checking the small icon right of the "No Device Connected" message. The symbol should be a USB symbol when working with USB enable product...:
How to reset the WPR400
Resolution:
Open the WPR400 enclosure Locate the IPB micro push button on the Main board. Press and hold the reader schlage button until a double beep sounds release the Schlage button. Then press the IP...: