Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ old vs new potted circuit ”

Resolution: The potted circuit breaker for the Von Duprin EL device does the switching from the 16 amp pull coil on the solenoid to the .33 amp holding coil of the solenoid.:

Is the power to the Von Duprin potted module polarized?

Resolution: The power to the Von Duprin potted module also called potted circuit breaker is non polarized.:

How do you test the potted circuit breaker or potted module on an EL device?

Resolution: For Potted Modules (black color) shipped before August of 2012, you can test by applying power to the potted circuit breaker to and if good the following voltages will be seen (be careful...:

Is the 900-ELK wiring adaptor required when using the PS914 power supplies?

Resolution: Products shipped on or after August 8, 2012 no longer require the EL wiring adaptor. The ELK Wiring Adaptor (900ELK) was used only when using the PS914 power supply with either the 900-2RS or...:

Has the Main Printed Circuit Board used with all AD-Series products been updated?

Resolution: The Main Printed Circuit Board used with all AD-Series products has been updated with three major changes: - A more robust Tamper Switch and MUCH improved Tamper Switch lever arm and the location ...:

Are the EL wiring harnesses still required with the new potted module?

Resolution: EL wiring harness is no longer needed with new EL potted modules.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ old vs new potted circuit ”

RELATED FAQS