Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ option board for QEL ”

Resolution: Communication takes place between the 2Q option board and the Von Duprin QEL exit device. If this communication does not occur then the device will not retract. The 900-2Q board is not ...:

How many Von Duprin QEL devices can be connected to a power supply?

Resolution: Product Ordered before 7/10/2012 - Product identified by no label on QEL motor. You must use the 900-2Q option board with the PS900 power supplies to operate the QEL devices. The attached ta...:

Will the 900-2Q option board operate an EL device?

Resolution: The 900-2RS is recommended to be used with EL devices but if you have a 900-2Q with PS914 power supply it can be used to operate up to two EL or one EL and one QEL devices .:

Will the Von Duprin PS902 power supply operate the QEL device?

Resolution: The Von Duprin PS902 power supply will operate the QEL device as long as you also use the 900-2Q board for devices shipped prior to September of 2012. After July of 2012, the 900-2RS boa...:

Will there be 900-2Q boards for warranty purposes now that the QEL'S do not require the boards?

Resolution: The 900-2Q board is no longer available. For warranty purposes, QEL conversion kit and 900-2RS board are required. The 900-2RS replaces the 900-2Q board. :

Is the 871-2Q board required on QEL devices when using the PS 873 AO to operate my QEL devices?

Resolution: The QEL exit devices that were shipped prior to August, 2012 will only communicate to the PS873 with 871-2Q option board or PS900 series with 900-2Q option board. If you...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ option board for QEL ”

RELATED FAQS