Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Qel calibration button new ”

RELATED FAQS

Resolution: The QELA motor that has shipped since 2015 is self calibrating. Older versions had a calibration button, and these notes would apply: Calibration is an internal process of the QEL device&...:

Why would QEL retract and release repeatedly?

Resolution: The following could cause the QEL device to retract and release repeatedly: If this is a vertical rod type device, the vertical rods could be adjusted too short. Check rods for dead locking, ...:

Why does the QEL cycle 3 times with a solid red led and does not work?

Resolution: Improper mechanical adjustment or QEL calibration could cause the QEL cycle three times with solid LED and not work. First check mechanical adjustment on vertical rods or mortise lock device and co...:

Camera calibration on a hand reader, what should the row (r), column (c), and exposure (e) calibration values be to indicate proper camera alignment?

Resolution: On a biometric F-Series or E-Series hand reader, the desired row (r) value and column (c) value should each be zero (0), plus or minus 2. The desired exposure (e) value sh...:

How do you get the camera calibration values on a biometric F-Series HandPunch?

Resolution: To get the camera calibration values on a biometric F-Series HandPunch or F-Series HandKey, press the * (asterisk) key 11 times. It will display R (row), C (column), and E (exposure)...:

Will the QEL+ still work with the 900-2Q?

Resolution: You can use the QEL+ device with 900-2Q option board. The 900-2Q board is obsolete with no stock remaining. :

How do I identify the new QEL motor launched in 2012?

Resolution: The new QEL motor has a label affixed to the cover, the older QEL motor has no such label. See attached image.:

Can you convert the EL33A/35A or EL98/99 series exit device to the QEL device?

Resolution: The Von Duprin EL33A/35A/98/99 device can be converted to the QEL device by getting the correct sized QEL baseplate conversion kit. The existing PS914 or PS873 power supply can be used. ...: