Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ replace wireless transmitter ”

RELATED FAQS

Resolution: The 7910-967 is a part number for a discontinued RF actuator. It was replaced by the 8310-3856WS RF actuator. The new 8310-3856WS requires the use of an 8310-865 RF receiver. When replacing the ol...:

Can a magnet, or sentronic device, be released and close the door from a button at a desk?

Resolution: If a door is being held open by the LCN SEM 7800/1900 magnet or any ME/SE Series Sentronic LCN closer, you can remotely release that door to close by ordering the following parts and wiri...:

How does Dynamic Channel Switching (DCS) work on the AD-Series?

Resolution: Setting Dynamic Channel Switching 1) Connect and couple the SUS to the PIM400 you intend to change. See the SUS User Guide for details 2) Under “PIM Properties” and the “Edit” tab is ...:

What is the new number for a 7910-931 receiver?

Resolution: The obsolete 7910-931 receiver has been replaced by the 8310-865 receiver.Replacing the receiver requires you to also replace the obsolete 7910-444 transmitter module with the 8310-844 transmitter.:

Will a new RF "programmable" transmitter work with an older RF receiver that has "dip switches"?

Resolution: The newer "programmable" RF transmitters/receivers will not work with the older "dip switch" transmitters/receivers. The frequency and coding are different.:

How many actuators can you have programmed on an 8310-865 receiver?

Resolution: The 8310-865 RF receiver can have up to 100 transmitters programmed to it.:

How do you program the 8310-865 RF receiver?

Resolution: To program the 8310-865 receiver: Set the dip switches 1 to the "OFF" (pulse) position. Set the dip switches 2 to the "OFF" (0.5s) position. Momentaril...: