Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ rim cylinder length ”

RELATED FAQS

Resolution: 99-2:

Why do the mounting studs on the 379L not line up with the back of the 55 rim?

Resolution: The existing 373L control was modified and re-named as 379L to allow us to use the 55 rim device on an ADA door opening. The 379L control is our 373L with different hex st...:

What is the length of a cylindrical tailpiece?

Resolution: Key-in-lever tailpieces differ in length depending on the lock series, function, and design. Click here to identify the tailpiece and length. NOTE: Modular ...:

What Schlage cam will operate Sargent locks?

Resolution: Click here for a list of available Schlage cams comparable to the Sargent 13-0660. :

Mortise cylinder with switch.

Resolution: The XB09-195, XB09-795, and XQ11-804 are basically modified mortise cylinders. The overall length of the mortise cylinder switch is approximately 1-9/16" (1.563"). The diameter of the cylinder face...:

What cam to use for a modular cylinder in Sargent mortise lock?

Resolution: The Sargent cams listed below work for all applications except 16 inside and 50 outside. The equivalent Sargent cam is the 13-0660. Use the B520-736 for modular cylinder lengths of 1 1/8",...:

What cylinder and cam is used with the 650 series keyswitch?

Resolution: If blocking rings (PN 36-079) are needed, specify dimensions when ordering. See below for blocking ring (PN 36-079) dimensions. Blocking RingSpecify Dimension 1//8" 012 3/16"&nb...:

What cylinder length do you use for escutcheon trim for the L series mortise lock?

Resolution: Typically for a 1-3/4" door you would use a 1-1/4" cylinder. Use the Table in the Pricebook for a reference:Note: The 30-001 used with Rose trim on double cylinder applications requires a Blo...:

What cylinder is required for the 360L from Von Duprin?

Resolution: A 1 1/4" mortise cylinder with straight cam (similar to the Schlage B502-191) or a 1 1/2" mortise cylinder with straight cam using supplied spacer collar. Cylinder length does not chan...:

What is the length of a Schlage rim cylinder?

Resolution: The Schlage rim cylinder lengths are given below and were measured from the face of the cylinder to the back of the tailpiece. Because of allowable tolerances for each part the average length is l...:

Which way is the tail piece of the rim cylinder is inserting into the Von Duprin 98/99 rim device from 996L trim?

Resolution: The tailpiece of the rim cylinder can be inserted into the Von Duprin 98/99 rim device either vertical or horizontal (using the tailpiece guide).:

How do I order an 88 rim to accept NL cylinder and pull by others?

Resolution: Order the device as 88 NL less trim. The cylinder will be mounted to the face of the door. Use templates 10156 and 40015.:

What cylinder is used for the Von Duprin -2 double cylinder function?

Resolution: The 98/99 rim device can be converted to double cylinder 98-2 or 99-2.Double cylinder features an inside key cylinder which locks or unlocks the outside trim (Classroom Function) and an&n...:

What cylinder does the 512 TP NL use?

Resolution: A 1-1/8 through 1-1/2" mortise cylinder with straight cam per Step 4 of 512NL Instructions.:

Does Schlage offer a Rim cylinder FSIC housing less core?

Resolution: Rim cylinder housing only for SFIC is part number 80-129.:

Does the Schlage SFIC rim housings accept both 6 and 7 pin IC cores?

Resolution: The Schlage small format interchangeable core rim cylinders 80-329, 80-159, 80-116, and 08-129 can accept 6 pin and 7 pin small format cores.:

What is the part number for the SFIC rim cylinder driver?

Resolution: The Schlage SFIC rim cylinder driver is part number B520-365, shown below. Figure 1: SFIC Rim Cylinder Housing:

Can I add a cylinder function to the 98/99 Rim EO device?

Resolution: To add a cylinder to the 98/99-EO rim device order a 110NL-MD for metal door or 110NL-WD for wood door with a standard rim cylinder and prep the door per template.:

What is the part number for the Schlage thumbturn rim cylinder?

Resolution: The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with...:

What is the part number for the Schlage small format rim cylinder tailpiece?

Resolution: B502-899 is the tailpiece for both the SFIC and standard rim cylinders.:

Do we offer a parts pack for modular mortise or rim cylinder?

Resolution: See descriptions for the 09-992 thru 09-997 parts kits for modular mortise cylinders. The 09-998 is a kit for a rim cylinder. :