Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
schlage cylinder in Falcon locks
”
RELATED FAQS
Question
Answer
What non IC cam is offered by Schlage to work in a Falcon MA lock?
Resolution:
Price Book 72A List Price $8.10:
Can I put a Schlage Key-In-Lever cylinder into a Falcon D100 or D200 lock?
Resolution:
For a Schlage "C" keyway: Specify "CP6" as the cylinder suffix when ordering D100 or D200 locks (All other Schlage keyways are not available).:
What is the part number for the Schlage cylinder to work in a Falcon T lock?
Resolution:
The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. Schlage offers Falcon Retrofit cylinders to fit many of Falcon's locks. Table 1 below con...:
What replaced the Falcon Z?
Resolution:
The Falcon W replaced the Z lock in July 2006. The Z lock was a cylindrical chassis.:
Can the Von Duprin 5100 electric strike be used on a pair of doors?
Resolution:
The following application information apply to the 5100 electric strike: Can only be used on a single door with a cylindrical lock Can not be used on a pair of doors Can not be used on a mullion:
Warranty information on Allegion Commercial products.
Resolution:
See here for our Warranty Information. :
Where can I find hurricane ratings for Schlage and Falcon?
Resolution:
There are several Schlage and/or Falcon locks that have been tested and approved for this application. For Commercial use the locks have been tested and approved as ...:
Does Falcon have a breakaway lever trim feature on mortise locks?
Resolution:
The MA lock does not have Vandlgard or a breakaway trim feature, however, the lever spindle on the MA lock will shear if too much force is applied in order to prevent internal lock damage and resis...:
Does Schlage make a level 4 bulletproof lock?
Resolution:
Schlage does not test their locks for ballistics or bullet resistance.:
Can I get the RU series with a Schlage Full Size Interchangeable core?
Resolution:
The RU lock can accept a Schlage Full Size core, but the cylinder suffix must be specified as "J IC-SC" so the correct parts are supplied. The tailpiece will come with the lock. Example: RU581J IC-SC:
Why does my 7500 retract the latch bolt but not re-lock the trim?
Resolution:
Tips for changing the function: The NL Drive screw will not be visible when lock body is set to Classroom function There is locktite on the screw that makes it seem like its turned down enou...:
What Schlage cam will operate Sargent locks?
Resolution:
Click here for a list of available Schlage cams comparable to the Sargent 13-0660. :
Do we have a Schlage conventional retrofit cylinder for Yale locks?
Resolution:
Standard Schlage cylinders will not fit in Yale locks, but Schlage does offer special retrofit cylinder that, when ordered, can fit into specific Yale locks. See below for retrofit options. ...:
What is the part number for the Schlage thumbturn rim cylinder?
Resolution:
The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with...:
Does the PD listed with lock model number mean anything?
Resolution:
Schlage and Falcon use the P cylinder suffix to designate conventional key-in-lever (KIL) 6 pin cylinder. The D means that the lock will have a deadlatch.: