Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ schlage hand held device user guide ”

Resolution: - With the CIP NOT inserted and the Schlage Utility Software (SUS) running o Enter the Master Programming PIN or Present Loc...:

Where can I download the latest version for the Schlage Utility Software?

Resolution: Updating the Schlage Utility Software (SUS) on a Hand Held Device (HHD) will cause the SUS "Login Password" AND the current device "Coupling Password" to be reset to factory default settings of - 1...:

Why doesn't the AD-Series-Exit Device communicate with the Hand Held Device after rehanding the lockset?

Resolution: During the rehanding of an AD-Series Exit (993) device or the rehanding of a CO-Series Exit (993) device it is possible for the customer to damage the 5-inch pcba by using the wrong screws. D...:

What does the message "ID temporarily invalid" mean when it displays on a biometric hand reader?

Resolution: Our biometric hand readers have a limitation on how many times you can try an unsuccessful hand verification. This is similar to secure computer/ system logins that kick you out after a certa...:

Do I have to couple each lock with the HHD/SUS after the coupling password is changed or updated?

Resolution: After updating the SUS coupling password, subsequent HHD’s will need the new coupling password entered before they can update any information in the lock, once the HHD has the correct coupling pass...:

How do I couple a Hand Held Device to a PIM400

Resolution: If the PIM400 has already been coupled with a HHD, the Coupling process will be disabled and the PIM400 will no longer go into its Coupling Mode. You must RESET the PIM400 in order to allow (re-en...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ schlage hand held device user guide ”

RELATED FAQS