Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
SMART CARDS FOR CO LOCKS
”
RELATED FAQS
Question
Answer
Why does my AD or CO series lock unlock when the lever is raised?
Resolution:
Installers have reported that their AD-CO Series cylindrical or mortise locks will unlock whenever the outside lever is lifted. This will occur if the outside spindle (square post) is install...:
Electronic Credentials
Resolution:
Items such as Magnetic Stripe Cards, PersonalIdentification Numbers, Smart Cards etc., that when presented to electronic locks either allow or deny access.:
How to build an L-Series chassis.
Resolution:
This Step-by-Step guide is specifically designed for the functions listed below, however, it can be referenced with a majority of L series functions since most of the parts are ...:
Selected the wrong lock model (CO-200 or CO-220) when updating CO Firmware.
Resolution:
For any CO-200-40 Privacy or CO-220-75 Safe School lock that was manufactured before May 2014: When updating the lock's firmware to CO.A.12 or later, SUS will first ask the question “Is this a CO-...:
What type of coin cell is used in the AD / CO Lock?
Resolution:
The coin cell for the AD and CO family of electronic lock products is a 3vdc lithium. CR2025 is the specified part number.:
Will the SUS pull the audit trail from the CL Series, CM Series, CO Series or AD Series locksets?
Resolution:
When the SUS and HHD are used in the “Auto Update” mode, the audit info will be automatically gathered each time the SUS is successfully connected with a lock.:
What is the part number for the twisted tailpiece for AD/CO exit device trim locks?
Resolution:
The part number for the AD or CO twisted tailpiece kit is: 46929303 Tailpiece Kit - (for Exterior Escutcheon -993 into Exit Device, i.e. Von Duprin 98 or 99) Exit Trim 46929303 Includes the...:
Why did my CO Lock stop working after the Reader Module (electronics) was changed?
Resolution:
CO Reader Modules are not individually replaceable, nor can they be swapped between locks. The inside and outside assemblies of a CO lock are a matched/mated set and cannot be swapped to change rea...: