Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ spacer vs springcage ”

Resolution: See image, ANSI A115.1 Mortise Lock Prep This door prep requires the N escutcheon with the L283-029 spacer kit to keep the springcage from falling into the door.&nbs...:

Why does my lever sag on an L9000?

Resolution: Levers may sag due to an incorrectly installed springcage or an incorrect springcage.Mortise locks with a fixed (rigid) lever such as an L9080 will use a spacer on the rigid lever (outside) and a s...:

What are the dimensions of the 993 spacer plate underneath the CO 993 Trim?

Resolution: 13 1/2" Long, 3 5/8" Wide, 1/4" Thick:

AD-993 - Cylinder loose in lever - Spacer missing

Resolution: In the early cylindrical version of the AD-Series 993 locks, a spacer may be required for proper cylinder functionality. Effected cylinder types are PD / LD / RD / JDIf a customer is ...:

Does the SL-Series door have a square edge?

Resolution: The SL-Series door is a square edge non-handed door. A Hinge Filler (also referred to as Hinge Spacer) is the small removable trim part located on the door between hinge leaf and hinge reinforcem...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ spacer vs springcage ”

RELATED FAQS