Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ undercut double egress door ”

Resolution: The 4040SE uses the regular arm for any Push Side mounting (minimum 28" door width). ST-2788 (a special arm and track) can be used to mount a 4040SE on the Push Side of a smaller (narrow) doo...:

Are astragals required on fire doors?

Resolution: Astragals are required on: 3 hour fire rated pairs: Double doors - swinging in the same direction Double Egress - swinging in opposite directions Fire rated Dutch Doors Fire rated 1 3/4" t...:

Can a Senior Swing 2850 or 2860 be used on a Double Egress (DE) door?

Resolution: The overhead concealed operators (2850/2860) will not work on a Double Egress frame because the doors are not in the same plane. You will have to use the surface mount (9553 / 9563) on Double Egres...:

Can wood doors be used with with double egress frames?

Resolution: Yes, wood doors can be used and installed in most hollow metal frame applications including FE-Series and DE-Series Double Egress frames. Caution - For fire rated applications the wood door manufa...:

What is the door undercut for a 25-C device?

Resolution: The bottom rod of the device will accommodate a 1/4" to 3/4" door undercut per 2130 template .:

DOUBLE EGRESS DOORS

Resolution: ; two way corridor openings:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ undercut double egress door ”

RELATED FAQS