Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ von duprin cylinder seperately ”

Resolution: The Von Duprin 370 series control required a 1 1/4" mortise cylinder and will not operate with 1 1/8" mortise cylinder.:

What is the part number for the Schlage thumbturn rim cylinder?

Resolution: The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with...:

What cylinders are used to operate Von Duprin devices?

Resolution: If unclear whether mortise, rim, or key-in-lever is needed, reference links below to determine what cylinder type is needed. In order to determine cylinder type n...:

What are the part numbers for the Schlage blocking rings?

Resolution: After selecting the correct blocking ring, specify the thickness. The table below shows the different thicknesses that the rings are offered in. &...:

What cylinder is needed when using the 9975L with 996L-M trim?

Resolution: A 1 1/4" mortise with straight cam similar to the Schlage B502-191 is needed when using Von Duprin 9975 mortise device with 996L-M trim.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ von duprin cylinder seperately ”

RELATED FAQS