Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ VON DUPRIN EXIT DEVICE TRIM FINISH ”

Resolution: - AD Series and CO series products require that the Night Latch (NL) screw is installed in the exit device. Be sure this screw is installed- Exit hardware and strike must be properly mounted ...:

What is the difference between the 376T and the 360T trim when it is used with Von Duprin 33/3547A exit device?

Resolution: The 376T trim activates and connects to the 33/3547A top rod. The 360T activate and mounts to the 33/3547A center case.:

Can danmark lever designs be used on Von Duprin Exit Device trims?

Resolution: Von Duprin does not offer any of the danmark lever designs by Schlage.:

Can I use an AD or CO - 993 Exit Trim with a Von Duprin 98/99 Concealed Vertical Rod exit device on a wood door?

Resolution: The AD or CO - 993 is NOT compatible with a Von Duprin 98/99 Concealed Vertical Rod exit device on wood doors.:

What parts of the device and trim for the 98/99 are 643E finish?

Resolution: Device: Pushbar end caps, pushbar trim and center case cover. Trim: Lever assembly, trim plate assembly (trim plate and bushing sleeve).Bronze Finish Comparison:

Why would the 996L trim not lock or unlock when installed with 98 or 99EO?

Resolution: The 98/99 rim and vertical rod exit devices are shipped with NL drive screw to function as a Night Latch. To convert the device to Class Room, remove the NL Drive Screw on 98/99 center case ass...:

Is the Von Duprin 88 exit device available in 609 Antique Bronze finish?

Resolution: No, the Von Duprin 88 is available in US3, US4, US10, US10B, US26, and US26D finishes. It is also available in US3A, US4A, US15, 643e, and sprayed glossy black (SPBLK). :

Does Von Duprin offer the 88 exit device in US5 finish?

Resolution: No, Von Duprin does not offer the 88 or 55 exit device in US5 finish. :

Why does my Trilogy Lock not retract the latch when I replace a lever trim on a 98/99 series device?

Resolution: If the NL screw on the 99 device has been removed the Trilogy lock will not retract the latch. :

What cylinder is used in a 210K trim for the 22 series exit device?

Resolution: Equivalent to the Schlage D series line with a C keyway. Part number 21-002.:

What replaced the Von Duprin 372L trim?

Resolution: The Von Duprin 372L & 370L/BE series trims are discontinued and there are no replacement for them. The new 33A/35A series exit devices use 360L trim. 370/BE trims were used with old style 33/35...:

Do we offer a lever trim with squared top and bottom for the 98/99 series exit devices?

Resolution: The Von Duprin 994L series trims were square on top and bottom. They were discontinued in July 2010.:

How do you route the wires for an E996L trim through the exit device?

Resolution: The wires run through the device out to the EPT. See step 7 on page 5 of E996L instructions.:

Where are hardware templates?

Resolution: All the templates can be found at us.allegion.com Please click here :

Is the Von Duprin 1609 strike fire rated for pairs of doors?

Resolution: The Von Duprin 1609 cannot be used on a pair of fire rated doors. We recommend using the Von Duprin fire rated mortise exit device in lieu of the rim device such as the Von Duprin 5575-F,...:

Does EL or QEL conversion kit for Von Duprin exit devices contain mechanism cover plate?

Resolution: The conversion kit does not contain a new mechanism case cover plate. If a cover plate is desired, you would need the Fire or Less Dogging Cover Plate for EL/QEL conversion kit and Panic cove...:

Is there any way to lock the push side of an opening with a Von Duprin exit device?

Resolution: You cannot lock the push side of the exit device as a panic device by design must allow exit. Any attempt to block an exit is forbidden by code.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ VON DUPRIN EXIT DEVICE TRIM FINISH ”

RELATED FAQS