Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Von Duprin field paint procedures ”

RELATED FAQS

Resolution: Steelcraft frames and doors are furnished with a high grade, low gloss, baked-on prime paint that provides the best possible protection against corrosion, abrasion and weather, and is an excellent ...:

Can Steelcraft doors be powder coated?

Resolution: Steelcraft does not offer factory powder coated doors and/or frames. Powder coatings usually require heat between 300 to 400 degrees to melt and cure the powder coat. The higher heat can ca...:

How can the Von Duprin 98/9975-L with 996L classroom trim function be converted as a night latch function in field?

Resolution: The following steps are required to convert the Von Duprin 98/9975L from classroom to night latch function: Order new 996L-NL-M trim and reset NL drive screw in mortise lockbody as se...:

Are Graintech doors available with GrainTech on one face and standard panels on the others face?

Resolution: GrainTech® doors are not available with different finishes on the inside and/or the outside door panels. Both panels must match.Standard GrainTech® finishes include:BirchAshOakMapleM...:

Does Steelcraft prime paint doors and frame?

Resolution: All Steelcraft Frame, Door and Architectural Stick components will receive one coat of sprayed-on factory paint which is a baked-on, rust-inhibited primer that conforms to the industry standard ANS...:

Can you convert the 510 L trim to an L-NL (storeroom) function?

Resolution: The 510L can be converted to a nightlatch 510L-NL by changing out a few parts to the trim. See 510L to 510L-NL conversion instructions for required parts that will need to be added/r...:

What options are available to add frame reinforcement for surface closer?

Resolution: Steelcraft offers two optional types of reinforcements for open section header to be installed in distributor shop or in the field: Full profile sleeve; is a 14 gauge, 16" long part to fit the p...:

AD changing Function in the field

Resolution: -On the AD series offline locks only you can change the lock function from Classroom/Storeroom to a Privacy, office or apartment function out in the field. - This is done via the HHD/SUS using...:

Can a Chexit release delay time be changed in the field?

Resolution: The release delay time for the Chexit is programmed into the Chexit module and cannot be changed in the field.The ability to change the delay time is restricted by the UL listing of the device.&nbs...:

PRIME PAINT

Resolution: Primer:

Is there a Von Duprin conversion kit to change mechanical to electric latch retraction (QEL) in the field?

Resolution: Followings are the list of the electric latch retraction (QEL) kits:114317-00QELA Modular Conversion Kit040061-00QELA Modular Conversion Kit w/CON958002-00HD-QELA Modular Conversion Kit040062-...:

Can the Von Duprin 9947 metal door device be converted to the 9947WDC wood door device in the field?

Resolution: The Von Duprin 9947 metal door device can be converted to the 9947WDC wood door device by purchasing conversion kit number 050134-XX. This conversion kit is only for the panic version only. Fire ...:

How do you change the Von Duprin 990TP trim to NL function?

Resolution: Recommend to order a new 990NL-R/V or M trim to change from TP/Classroom function to NL/Storeroom function. You will also need to reinstall the NL drive screw back into into the mast...:

Can a Von Duprin 3' pushpad exit device be converted to a 4' device in the field?

Resolution: A 3' exit device cannot be converted to a 4' exit device. You will need to replace the 3' device with a 4'. Conversely, a 4' device cannot be converted to a 3' device. Converting these exit de...:

What is dual switch monitoring or DS?

Resolution: The DS is Dual Monitor Switch for Von Duprin 6100 and 6200 series electric strikes (not 6300 or 6400)DS option cannot be added to a Von Duprin 6000 series electric strikes in the field. It is only ...:

Can the Von Duprin 230L trim be re-handed in the field?

Resolution: The Von Duprin 230L trim can be re-handed in the field by following the steps listed in the 230L/L-BE Instructions:

Is the Von Duprin E996L electric trim handing field reversible?

Resolution: The Von Duprin E996L electric trim is field reversible. See attached 996L installation instructions on page 2 for rehanding procedure. 996L Installation Instructions:

What are the Von Duprin part numbers for RX, LX and RX,LX-LC switch kits for field installation?

Resolution: The attached table shows the part numbers for LX-RX and LX-RX-LC switches field installed.: