Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ von duprin pushbar retrofit kit ”

Resolution: A PBKIT is a Pushbar Retrofit Kit.The pushbar retrofit kits are not the same for 33A/35A and 98/99 series exit devices. Depending on the finish of the exit device, the pushbar end caps are di...:

Does the push bar end cap come as a separate item or do you have to order the push bar kit on the 33/35A or 98/99?

Resolution: How to order: specify devise type, size, and finish. Example: PBKIT 33A 3' US28:

Why is the Von Duprin exit alarm ALK going into alarm on it's own?

Resolution: The following may cause the ALK to go into alarm: Make sure red and blue wires on the RX switch are connected to the exit alarm ALK terminal block and yellow wire is taped off. Check the red an...:

Why does my Chexit device open without sounding the alarm?

Resolution: :

Can you field install a RX switch on the 24/25 device?

Resolution: The RX switch can be installed at the factory when device is ordered or in the field with part# 650359-00. Installation instructions here will show how the RX swi...:

Will the EL retrofit kit work on an old style 3347?

Resolution: The EL retrofit kit will work with an old style 33/3547 exit device.:

Can you cut the EL conversion kit - 3' base plate to fit a 30" 9947 device?

Resolution: You need to order the EL98/9947 or 3' EL conversion kit. This will fit on 28 1/8" minimum door opening on two vertical x vertical rod device doors.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ von duprin pushbar retrofit kit ”

RELATED FAQS