Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ WHAT CYLINDER DOES VD NLN TRIM TAKE ”

RELATED FAQS

What cylinder does the 512 TP NL use?

Resolution: A 1-1/8 through 1-1/2" mortise cylinder with straight cam per Step 4 of 512NL Instructions.:

What type of cylinder does theVon Duprin 373L trim take?

Resolution: All Von Duprin 370 Series trims require a 1 1/4" mortise cylinder with a straight cam.:

What keyway comes with the Falcon 19-KIL?

Resolution: The standard cylinder keyway that comes with the 914KIL trim is a Schlage 6 pin "C" section.:

Which way is the tail piece of the rim cylinder is inserting into the Von Duprin 98/99 rim device from 996L trim?

Resolution: The tailpiece of the rim cylinder can be inserted into the Von Duprin 98/99 rim device either vertical or horizontal (using the tailpiece guide).:

Can you use a new 812L on an old bar that had a 182L?

Resolution: The current 812L trim will replace the older 182L trim. Due to the thicker escutcheon plate of the 812L trim a 1 1/2" mortise cylinder with straight cam for mortise devices or a longer rim cylinde...:

Will the standard cylinder drive bushing on a 1790 device work with my 179L trim?

Resolution: Step 3 and 4 of 179L Instructions will show the old drive bushing being removed & the new drive bushing getting installed: