Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ What does SS look like? ”

Resolution: The hole should be drilled in the field once the end cap is located on the door. It is a 5/8" hole, that is located 5/16" from the end of the mechanism case. See installation instruction of t...:

What grade of stainless steel do we use in the levers on L9000 locks?

Resolution: Schlage offers 629 and 630 stainless finishes on levers for the L-Series only. These levers are made of 303 or 304 grade stainless steel.:

Can you have an EL device and a SS device on the same device?

Resolution: You can not have an EL and SS in the same device as the EL and SS devices have two different base plate assembly.:

Can the Von Duprin SS and ALK option be in the same device?

Resolution: Depends on what is being ordered; SS can stand for either the "Signal Switch" or the "Silk Screen" push bar. The SS (Signal Switch) and ALK (Exit Alarm) sit in the same location in the exit devi...:

What is the difference between Von Duprin LX and/or RX switches and the Signal Switch SS option?

Resolution: The RX monitors the push bar while the LX monitors the latch bolt of the exit device. A SS device has an LX and a key cylinder switch plus an emergency push bar signage.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ What does SS look like? ”

RELATED FAQS