What is a 30-003 holdback cylinder?
Part numbers included:
30-023 Holdback Mortise Cylinder
30-003 Holdback Mortise Cylinder with Compression Ring & Spring
30-006 Holdback Mortise Cylinder Concealed Shell
...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage
What is the thread on a mortise cylinder?
The thread spec on Schlage and Falcon mortise cylinders is 1.150 x 32...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon
What cylinder do I use with Monarch key-in-lever (KIL) trim?
The Monarch 914KIL (key-in-lever) and 914KIL-NL trims are built with a C Keyway cylinder (not made by Schlage or Falcon).These trims are always Keyed Different.The cylinders can be changed using the f...
Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Key Systems » Cylinder Category » Falcon | Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon
What is the length of a cylindrical tailpiece?
Key-in-lever tailpieces differ in length depending on the lock series, function, and design. Click here to identify the tailpiece and length.
NOTE: Modular cyl...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage
What is the difference between legacy Primus, Primus RP and Primus XP?
Each legacy Primus can have any combination of (5) legacy Primus finger pins using pins #1 - #6.Each Primus XP can have any combination of (5) legacy Primus finger pins using pins #1 - #7, but MUST co...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Keys » Keys » Schlage
What cylinders are available with UL437?
UL437 is testing requirement that cylinders pass both a timed cylinder pick test, a forceful core/cylinder pull test as well as a destructive entry test. We have various cyli...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon
What cylinder length options are available?
There are different mortise cylinder length options depending on the cylinder type. Below is a list of available options for conventional, FSIC, and SFIC cylinders, as well as the convention...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage
What is the part number for the Schlage thumbturn rim cylinder?
The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with ...
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage