Category: Cylinder

(Results from 21 to 30)
When did Everest C123 become the standard default keyway?
In 2002, the standard default keyway for Schlage cylinders went from Classic C to Everest C123.  ...
Schlage Commercial » Key Systems | Schlage Commercial » Key Systems » Cylinders | Schlage Commercial » Key Systems » Cylinders » Cylinder | Schlage Commercial » Key Systems » Keys | Schlage Commercial » Key Systems » Keys » Keys | Schlage Commercial » Key Systems » Keys » Keys » Schlage
When is Everest SL a good solution?
This document outlines the parameters and shows some example cases for when Everest SL should be used....
Schlage Commercial » Key Systems » Cylinders | Schlage Commercial » Key Systems » Cylinders » Cylinder | Schlage Commercial » Key Systems » Keys » Keys | Schlage Commercial » Key Systems » Keys » Keys » Schlage
What is the XQ11-948 part number?
XQ11-948 is a part number that is added to a Schlage Interchangeable Core mortise cylinder (either Full Size or Small Format) to invert the cam for cylinder dogging....
Schlage Commercial » Key Systems » Cylinders » Cylinder
Does the 40-247 Everest SL pin kit include all FSIC parts for rekeying?
There are 4 FSIC parts not available in the 40-247 Everest SL pin kit.90-004 Everest SL FSIC 7 pin drive pin (a.k.a. the cap pin) 90-003 Everest SL FSIC 7 pin control pin (a.k.a the tombsto...
Schlage Commercial » Key Systems » Cylinder Mechanism | Schlage Commercial » Key Systems » Cylinders » Cylinder
What are the cylinder dimensions for a Falcon MA mortise lock?
Dimensions are dependent on the type of cylinder going into the lock.  Type of trim (rose/sectional vs escutcheon) does not impact cylinder dimension in Falcon MA.  For 5 or 6 pin conve...
Schlage Commercial » Key Systems » Cylinders » Cylinder | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon | Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Does Schlage offer a plastic Full Size Construction Core?
Schlage does not offer a plastic (disposable) Full Size Construction Core.    ...
Schlage Commercial » Key Systems » Cylinders » Cylinder
Is there a difference between a full size non-IC and IC cap pin?
There was an older cap pin, part number C603-347 which is no longer available. This cap pin was approximately .475" long by .095" diameter....
Schlage Commercial » Key Systems » Cylinders » Cylinder
Why are some Primus finger pins copper colored?
...
Schlage Commercial » Key Systems » Cylinders | Schlage Commercial » Key Systems » Cylinders » Cylinder
Does the CYL 1-1/4" Schlage Everest Mortise Cylinder with two keys & 1/8" spacer ring have an interchangeable core?
It is a different part number for Interchangeable core:  FSIC with core 20-061 FSIC with core 20-061 SFIC with core 80-302 SFIC with core 80-302 ...
Schlage Commercial » Key Systems » Cylinders | Schlage Commercial » Key Systems » Cylinders » Cylinder | Schlage Commercial » System Components » Keyswitches
What cylinders can have Schlage split key construction keying?
For Schlage Commercial, split key construction keying (CK) is available for standard conventional style 6-pin cylinders only.  Split key is not available for:Primus cylindersFull Size Interc...
Schlage Commercial » Key Systems | Schlage Commercial » Key Systems » Cylinders » Cylinder | Schlage Commercial » Key Systems » Keys

Support by product