What products are available with an antimicrobial finish?
DESCRIPTION: The antimicrobial coating is specially formulated to inhibit the growth of bacteria by interrupting cell multiplication. The result is that the silver ions surround bacterial cells, blo...
Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » D Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Deadbolts » B Series (Schlage) | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Ives
Schlage AL small format spacer installation requirements.
The Schlage AL-Series SFIC locks require one (1) small format spacer (D500-000) for 7-pin cores and two (2) small format spacers for 6-pin cores. When these spacers are not instal...
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued
What replaced the A700-009 driver?
The A700-009 driver was obsoleted August 2005 and was replaced with the A700-039 driver and A700-041 finished cap....
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued
Is there a tool to drill the thru bolt holes on cylindrical locks?
Order the M204-198 thru-bolt jig, see Figure 1.
Figure 1: M204-198 thru bolt jig
The 40-080 was the old Schlage jig. The 030736-000-70 was the old Falcon jig. When the jig changed to th...
Schlage Commercial » Mechanical Locks » Cylindrical » B Series (Falcon) | Schlage Commercial » Mechanical Locks » Cylindrical » T Series (Discontinued) | Schlage Commercial » Mechanical Locks » Cylindrical » W Series | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series
What is the part number of the new plastic castlenut wrench?
Discontinued from Schlage.
The castlenut wrench material was changed from steel to a very strong polymer. The new part number is 40-017.
...
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » D Series - Discontinued
What is the part number for the latch adapter used with 1" face plates for 1-1/8" prep?
Schlage offers a face plate adapter to adapt 1" face plate to 1 1/8" door
preparation, part number is A501-878.
...
Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S Series