How do I order a lock for a non-standard or thick door?
Most locks will have a standard door range they will install on, but occasionally customers will want to use them on thicker doors. In order to do so, the extended door thicknes...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Deadbolts » D Series (Falcon) | Schlage Commercial » Mechanical Locks » Deadbolts » B Series (Schlage) | Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
MA launch information
The MA was launched 4/1/10 and replaced the Falcon M lock.
...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Falcon
Is there a cam for a Schlage IC cylinder to operate a Falcon MA lock?
For Schlage Modular Mortise cylinders, such as the 20-001, there are two cams available to be used with the Falcon MA mortise lock:
L583-638 - for Schlage modular cylinders with 1 1/8", 1 3/8...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Is the MA lock available with the RX feature?
The MA RX features a single switch within the chassis that will monitor both the inside and outside knob/lever. The switch is only available as Normally Open (NO)....
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Does Falcon have a breakaway lever trim feature on mortise locks?
The MA lock does not have Vandlgard or a breakaway trim feature, however, the lever spindle on the MA lock will shear if too much force is applied in order to prevent internal lock damage and resis...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
MA lock case dimensions.
See below for commonly requested dimensions on the MA lock. Dimensions not found in other literature have a square around them.
CL refers to "Centerline".
...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Is the MA lock handing field reversible?
The MA lock is field reversible, except for the MA161 function (Connecting room/exit latch). The MA161 handing must be specified at the time of ordering and cannot be re-handed in the field.The proces...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series