Category: MA-Series

(Results from 61 to 70)
Is split trim available with the MA lock?
Split designs (including knob by lever) are available with the MA lock as long as the trim style (rose or escutcheon) is the same on both sides.  ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
How do I remove the lever on an M lock?
To remove the M lock trim follow the steps below in reverse.       The M lock spanner wrench is 021415.  Although this wrench is no longer available from ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Falcon
Will a Schlage hotel cylinder operate the Falcon MA451 lock?
The Schlage Hotel cylinder will operate the Falcon MA451 when used with the Schlage FSIC housing and core (30-010 or 30-140) with the B520-698 cam.The Schlage Hotel cylinder will also operate the Falc...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Mechanical Locks » Mortised » MA-Series
When was the Falcon M lock discontinued?
The Falcon M series was discontinued 3/31/10 and was replaced by the Falcon MA series....
Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Falcon
Explain the MA581 function
MA581 operation: Latchbolt operated by key from outside or by operating inside knob/lever. Outside knob/lever is always inoperative. Auxiliary latch deadlocks latchbolt when door is locked....
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Falcon MA lock wire color.
Solenoid: Black (2 wires) RX (monitors both sides) Normally Open: Green (pin 6 when connector included) Common: Orange (pin 5 when connector included) The current version of t...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Did Falcon mortise locks have a latchbolt with a nylon insert?
Older Falcon mortise locks had an option with a latchbolt assembly that had a nylon insert. This latchbolt assembly was discontinued in 1993. ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Falcon
Will a Corbin Russwin Master Ring cylinder fit into a Schlage mortise lock?
Neither Schlage or Falcon make a cam for a Corbin Russwin Master Ring cylinder to be used in a Schlage or Falcon mortise lock....
Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Can I use a cylinder on a Falcon MA311?
This is not possible as the Falcon MA311 does not have any cylinder retaining components in the lock case.  ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
What is included with the Falcon MA series Trim Packages?
The Falcon MA Trim package contains inside and outside trim, screw pack with mounting hardware. Does not include armor front or strike.    ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series