Category: MA-Series

(Results from 71 to 80)
In a Falcon MA mortise lock, how far does the key need to turn to retract the latch?
In Falcon MA mortise locks that have latch retraction by key, latch retraction begins at 4 o'clock (about 120 degrees) and latch is fully retracted at 5 o'clock (about 150 degrees).   ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Are screws supplied with the MA strikes or armor fronts when ordered separately?
Screws are not provided with armors or strikes when ordered separately. Please order S76300 if additional screws are required....
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
What is the Falcon MA series latchbolt throw?
Latch bolt: Two-piece stainless steel, mechanical anti-friction bolt. 3⁄4" projection., stainless steel with two 3⁄16" diameter hardened steel, free-turning, saw-resistant roller. ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
How do you remove knob trim from Falcon MA mortise lock?
The Hana knob on Falcon MA locks (discontinued 2021) has a catch. Depress the catch to remove the knob.  After knob is removed, rose can be removed to gain access to the mounting scre...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Does the Falcon MA still offer a Hana Knob?
The Hana knob was offered up until December 31st, 2021.  ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Can you convert the Falcon MA851 to MA881 in the field?
In field conversion from fail safe to fail secure (or from fail secure to fail safe) is not possible on the Falcon MA series because different lock bodies are used.   A7851-12-xx&nb...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Does the MA541 ship with handing screws?
Due to the function of the MA541 handing screws are not required nor will be shipped with the lock. Latch bolt retracted by knob or lever from either side.Deadbolt thrown or retracted by key outs...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
What is the Falcon MA deadbolt throw?
The deadbolt throw of the Falcon MA series is 1"....
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Does Falcon offer a MA series mortise service kit?
The discontinued Falcon M series did offer internal lock case parts as serviceable parts, but there was no M-series service kit....
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
When was the Falcon M series mortise discontinued?
The Falcon M series mortise was discontinued in April of 2010 and was replaced by the Falcon MA series mortise. There is no catalog available for the discontinued Falcon M series, however, the F...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series

Support by product