Category: MA-Series

(Results from 81 to 90)
What is the solenoid coil resistance on the MA series solenoid?
Resistance can be determined by dividing the voltage by the current.  12VDC divided by 0.42A = 28.57 24VDC divided by 0.21A = 114.28 ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
What is the escutcheon screw dimensions for E77301 and E77300?
E77301 - 2" 10-24 UNC 2A  E77300 - 1.75" 10-24 UNC 2A ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Is 630 Stainless Steel finish available on the latitude lever for Falcon MA series mortise locks?
The following lever designs are not available in 630 finish with Falcon MA series: Latitude, Longitude, Broadway, and Boardwalk ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Is the RX switch available as a separate item on the Falcon MA881?
The switch is not a servicable item. A complete lock case must be ordered with the switch factory installed. ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
What finishes are available with the indicators for Falcon MA mortise locks?
The Falcon MA Mortise indicators are available in 626 Stain Chrome or 630 Satin Stainless Steel only. ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
What is the 012727-000-30 emergency tool?
The 012727-000-30 was an emergency tool for the Falcon M series privacy functions (M301, M311, and M321).  This tool worked for doors up to 1 3/4" thick.  ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
What is the difference between the Falcon MA-series thumbturns?
The AS75319 thumbturn has two clips on the assembly whereas the AS76319 is assembled with one clip....
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
What is the mounting plate part number for the inside lever on the MA161?
Exit or connecting lock - Latch bolt operated by knob/lever from inside. No trim outside. Auxiliary dead latch.The part number for the mounting plate is: AS5813 See special function installation ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Can Schlage or Falcon cylindrical locks be used on a MRI room application?
Neither Schlage or Falcon make a product specifically designed for use in a MRI room application. MRI rooms may be modular, and hardware may be supplied by the manufacturer. In instances where hardw...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Deadbolts » B Series (Schlage) | Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
What replaced the M631?
The MA641 installed without the thumbturn is the closest replacement for the M631....
Schlage Commercial » Mechanical Locks » Mortised » MA-Series

Support by product