How do I remove the lever on an M lock?
To remove the M lock trim follow the steps below in reverse.
The M lock spanner wrench is 021415. Although this wrench is no longer available from ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Falcon
What size of 2390 replaces the discontinued 1390 device?
The 2390 is only available in two sizes, a 21"(overall 24.125" w/ endcaps) and a 24"(Overall 27.125" w/endcaps) unlike the older 1390 which could have been ordered to size. You would o...
Schlage Commercial » Exit Devices » Recessed » 2390 Series » Falcon | Schlage Commercial » Falcon
When was the Falcon M lock discontinued?
The Falcon M series was discontinued 3/31/10 and was replaced by the Falcon MA series....
Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Falcon
What replaced the Falcon Z?
The Falcon W replaced the Z lock in July 2006. The Z lock was a cylindrical chassis....
Schlage Commercial » Falcon
Is there a manufacture date on the 9100 operator somewhere?
There is an inspection sticker placed on the Motor of the Motor/gear box assembly and also on the top of the transformer on the control box. This inspection sticker has the manufacture date, whi...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical | Schlage Commercial » Automatic Operators » Electromechanical » 8200 Series | Schlage Commercial » Automatic Operators » Electromechanical » 8200 Series » Falcon | Schlage Commercial » Automatic Operators » Electromechanical » Benchmark | Schlage Commercial » Automatic Operators » Electromechanical » Benchmark » LCN | Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Automatic Operator | Schlage Commercial » Door Controls » Automatic Operator » 8200 Series | Schlage Commercial » Door Controls » Automatic Operator » 8200 Series » LCN | Schlage Commercial » Falcon | Schlage Commercial » LCN | Schlage Commercial