Category: Falcon

(Results from 81 to 90)
What cylinder is used for the Falcon 510 L NL lever trim?
What cylinder is used for the Falcon 510 L NL lever trim?  This trim uses a Mortise cylinder, 1 1/8" to 1 1/2" long with "straight" cam.  ...
Schlage Commercial » Falcon
What is the part number for the anchor block assembly on the Falcon 2390 exit device?
BLOCK.103Contact product support for further information  at 877-671-7011, option 2 then option 3....
Schlage Commercial » Exit Devices | Schlage Commercial » Falcon
Are weep holes available for the Falcon 24 or 25 series exit devices?
No, the 24 and 25 series exit devices are not available with drainage holes/weep hole options....
Schlage Commercial » Exit Devices | Schlage Commercial » Falcon
Is there an electrified version of the Falcon 8500 lock body?
No.  If you would like to discuss options, please contact product support at 877-671-7011,  option 2,  then option 3   ....
Schlage Commercial » Falcon
What is the part number for the Falcon 1690 auxiliary package?
For the 1690 auxiliary package in US28, use part number PKG.150.For the 1690 auxiliary package in DC13/DC35, use part number PKG.151....
Schlage Commercial » Exit Devices | Schlage Commercial » Falcon
What size is the dogging key for the Falcon 20 series?
The Falcon 20 series comes with a 5/32" L-Shaped hex wrench for dogging....
Schlage Commercial » Exit Devices | Schlage Commercial » Falcon
What is the set screw on the side of an SFIC housing used for?
This set screw just provides additional security. It mounts diagonally in the housing wall and when tightened, holds the housing securely in place against the lock case.  ...
Schlage Commercial » Falcon
Von Duprin and Falcon Technical Support Videos
Allegion product support agents continually add  to the library of common support questions. Click HERE for the Allegion Commercial Product Support YouTube channel.   These vid...
Schlage Commercial » Exit Devices | Schlage Commercial » Falcon | Schlage Commercial » Von Duprin
Can the Falcon MEL or EL conversion kit be used on a Monarch exit device?
No, if a Monarch device needs to have electric latch retraction, the Falcon conversion kits are not compatible.  A new Falcon electrified device would need to be ordered....
Schlage Commercial » Falcon
Which Falcon device series and types can be ordered with the MEL option?
All Falcon 24 and 25 series devices can have the MEL option, except for the 25-M and F-25-M. ...
Schlage Commercial » Exit Devices | Schlage Commercial » Falcon

Support by product