Category: LM9200

(Results from 41 to 50)
Which Thumbturn is used with the Schlage L9000/LM9200 Escutcheon Inside Occupancy Indicator?
The Escutcheon Trim Inside Occupancy Indicator uses the Standard ADA Thumbturn shown below with the 09-544 ADA Thumbturn for Sectional Trim.  This applies to Occupancy Indicator Option...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LM9200
What are the dimensions of the Gen1 L9000 indicators?
The 09-611 indicator: Now called ChevronWhich is sometimes referred to as the birdhouse or birdcage indicator dimension is approximately 1-3/4" wide by 3-5/16" long.The 09-611 is supplied standard wit...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9200
Is there a Tactile lever option for the Schlage L9000 series?
There is a Tactile warning option for the L9000 series Mortise locks.  The following levers are available with the Tactile warning: Tactile warning applied to outside lever; available o...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9200
Can the LM9200 be used with an electric strike?
Schlage's LM9200 series was not designed for or tested with an electric strike....
Schlage Commercial » Mechanical Locks » Mortised » LM9200
Will the Schlage LM9200 series operate without the outside lever trim?
Based on the operation of the LM9200, the outside lever is required to retract the latches....
Schlage Commercial » Mechanical Locks » Mortised » LM9200
What is the part number for the Armor Front for the LM9200 series?
The part number for the non-UL listed armor front for the LM9200 series is 24594970.  (Specify finish when ordering.)...
Schlage Commercial » Mechanical Locks » Mortised » LM9200
What is an armor front?
The Armor Front for the Schlage L9000, LM9200, and LM9300 series has been referred as: Scalp, Face Plate...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9200 | Schlage Commercial » Glossary » Locks
Where can I find Interactive installation instructions for the Schlage LM9200?
Click here to launch the LM9200 Interactive Installation Instructions. ...
Schlage Commercial » Mechanical Locks » Mortised » LM9200
Can I order the L Electrified Motor assembly, part number L283-680?
The L9000 Electrified Motor assembly part number L283-680, is listed in the L Series Service Manual but is not available as a part.  The complete lockcase must be purchased....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LM9200
What is the part number for the latch cover for the Schlage LM9200 series mulitpoint lock?
The part number for the latch cover is 24871584.  A quantity of two per lock are needed. ...
Schlage Commercial » Mechanical Locks » Mortised » LM9200

Support by product